| Weight | 1.1 kg |
|---|---|
| Dimensions | 8.5 × 5.51 × 4.88 cm |
| Manufacturer | ‎Flngr |
Pre-Pressurized Accumulator Tank, RV Accumulator Tank 0.75L Max 125PSI, 1/2 MNPT Port Fitting, Flow Control Inner Bladder, Reduced Pump Cycling, Suitable for RV, Boat, Travel Trailer, Caravan.
Available in stock
People Also Viewed
-
Progressive International Progressive Dynamics PD4135KW2BV Inteli-Power 4100 Series Converter
-
2 Pack 5 Inch 8 Holes Foam Interface Pad Surfprep Foam Sanding Pads for Buffer (2 Pack)
-
Art Resin Mixer Epoxy Mixer and Paint Mixer Drill Attachment Paint Stirrers for Drill Mud Mixer Quart or Gallon Mixing Tools Crafting Epoxy Resin Mini Drill Mixer Paddle
-
Truetimber 2300-Watt Super Quiet Gasoline Powered Inverter Generator by Pulsar, CARB Compliant
-
TotalBoat-510825 High Performance Epoxy Kit (Gallon, Medium), Crystal Clear Marine Grade Resin and Hardener for Woodworking, Fiberglass and Wood Boat Building and Repair
Additional information
Description
Product Description
Product advantages:
- Reduce the frequent start of the water pump, prolong the service life of the water pump,
- The stable bottom bracket and rubber inner tank make the water flow more stable and effectively reduce the noise.
- The pressure setting can be adjusted to make the pre-pressure accumulator box work more efficiently.
- Small size, detachable, easy to carry and bring convenience to your life.
- The connecting port adopts a screw-type joint to take over, which has better sealing performance and effectively avoids leakage.
- Compatible with most pumps on the market, you can buy without worry.
installation method:
- Disconnect power to the pump and open the faucet or appliance drain valve.
- Install the tank on any line on the discharge side of the pump, use hose clamps to securely fasten the hose to the inlet and outlet fittings, otherwise flooding and/or equipment damage may result in restoring the water supply.
- Restore power and allow water to be pumped out of the final discharge point to remove air from the system.
|
|
|
|
|
|---|---|---|---|
|
Threaded joints take over, better sealing and avoid leakage. |
The mounting feet are equipped with NBR rubber for easier installation. |
The inflatable nozzle can be punched to adjust the pressure value of the accumulator tank according to the pressure of the pump. |
The rubber liner stabilizes the pressure, effectively reduces noise, makes the surrounding quieter, reduces pump circulation and prolongs the service life of the pump. |
Warning:
Do not use for pumping flammable liquids, gasoline, kerosene fuel oil, do not use the pump in explosive environments or where flammable vapors are present.
Check the tank pressure regularly, turn off the power to the pump, and open the tap to release the pressure. Check tank pressure and adjust if necessary.
working principle：
- When the water pump is turned on, the water enters the pressure tank. When the pressure tank is filled, the water pump stops working.
- When water is needed, the water in the pressure tank first enters the pipeline due to the pressure of the air bladder, and the water pump remains closed until the pressure in the pressure tank is lower than the starting pressure of the water pump, and the water pump starts to work, and so on.
Product Features:
- The RV is in use:
It can effectively absorb the excess heat that enters the water system pipeline due to the heater, and there will be no “pop” sound when the faucet is turned on.
- When the RV leaks:
After the RV is used for a long time, the pipeline connection may be loose, and there will be dripping water leakage, which will cause the pump to start frequently. At this time, the pressure tank can effectively reduce the number of pump starts.
- During the bath:
Due to the uneven pipeline and nozzle, the pump starts and stops frequently. At this time, the pressure tank can effectively improve this phenomenon.
No products in the cart. 
Reviews
There are no reviews yet.