EPEVER MPPT Solar Charge Controller 40A 150V PV Solar Panel Controller Negative Ground W/ MT50 Remote Meter for LiFePO4 Battery [Tracer4215BN]

Compare Wishlist

in Batteries & Chargers

EPEVER MPPT Solar Charge Controller 40A 150V PV Solar Panel Controller Negative Ground W/ MT50 Remote Meter for LiFePO4 Battery [Tracer4215BN]

Sku: B07429RK43

Features

Brand	SolarEpic
Voltage	1.5E+2 Volts
Product Dimensions	11.93"L x 7.2"W x 2.52"H
Material	Metal
UPC	615068180009

Negative Grounding MPPT Solar Charge Controller Tracer4215BN, The Advanced MPPT Control Algorithm makes this 40 Amp MPPT Controller Tracking Efficiency higher than 99.5%
150V Max PV Input Allow this Charge Controller Handles More Solar Panels Wiring in Series to minimize PV current, 5 x 12V Solar Panel Connecting in Series will be applicable
Work with Lithium batteries,LiFePO4(4S/8S),Li(NiCoMn)O2 (3S/6S/7S) and all Lead Acid Batteries, Sealed AGM GEL and Flooded Battery, and USER mode
RS-485 communication bus interface and Standard MODBUS interface available to meet various communication requirements, Temperature Sensor and PC monitoring Cable Attached
This 40 amp MPPT Solar Panel Charger works with 600W Solar Panel on 12V Battery System and 1200W on 24V Battery. Max Solar Panel 1560W, multiple load mode allow you set the load on/off in different situation. A Solid State Relay is recommended if you are using a Power Inverter

Compare Wishlist

People Also Viewed

Description

Prolong The Life Of Your Battery!

The smart battery protection system shields your device from being overcharged, overloaded, discharged, or overheated, reverses polarity, and provides efficient short-circuit protection. It can handle 520W Solar Panel on a 12v battery system or 1040W Solar Panel on a 24v battery system. Works equally great for home, industrial or commercial use. Designed for optimum and safe charging performance.

Technical Data

40A MPPT Charge Controller Nominal System Voltage: 12V, 24V

Rated Charge Current: 40A

Rated Load Current: 20A

Max PV Open Circuit Voltage: 150V / 138V

Max PV Input Power: 520W (12v battery) / 1040W (24v battery)

Support Battery Types: Lithium, LiFePO4(4S/8S),Li(NiCoMn)O2 (3S/6S/7S), Lead-Acid, Sealed(default), Gel,Flooded

MT50 Remote Meter Faceplate dimension:98×98 mm / 3.86×3.86 inch Frame dimension:114×114 mm / 4.49×4.49 inch Connector type: RJ45 Meter cable:Standard 2m,Max 50m Ambient Temperature: -20°C — +70°C/-4°F — 158°F

Remote Temperature Sensor Acquisition of battery temperature for undertaking temperature compensation of control parameters Length: 3 M

USB to RS485 Converter Adapter This adapter monitors the mppt charge controller using Solar Station PC software

Tracer 4215BN Series MPPT Solar Charge Controller 150V PV

SolarEpic Tracer4215BN 40amp Solar Charge Controller Feature:

Negative Grounding, 150V /138V PV Input
Metal Case allows for natural heat dissipation
Support battery types: Lithium, LiFePO4(4S/8S),Li(NiCoMn)O2 (3S/6S/7S), Sealed, Gel, Flooded and User
4 Stage Charging
Serial connection (string) of PV modules allows minimizing the charging current to save energy.
Advanced Maximum Power Point Tracking (MPPT) technology, with an efficiency of no less than 99.5%
Ultra-fast tracking speed and tracking efficiency
Features Standard Modbus Interface with RS485 Port

MPPT Solar Charge Controller 40A Tracer4215BN Schematic Diagram

EPEVER MPPT Solar Charge Controller 40A 150V PV input Negative Ground Schematic Diagram


SolarEpic 4215BN Solar Charge Controller 40A: Built with advanced power tracking technology to optimize the working of your solar charger system. The controller features a smart tracking algorithm that maximizes the energy from the solar PV module(s) and charge the battery. It supports over four charging options: sealed, gel, flooded and user-defined. Battery parameters can be set using the attached MT50 remote meter.	MT50 Remote Meter: Wide LED screen displays the real time operational data and the working status in digital, graphic and textual forms. Basically used for monitoring and setting the controller, it automatically identifies the type, model and relevant parameter data of solar controllers.	Battery Temperature Sensor and PC Communication Cable: It is used to monitor each controller on the network using Solar Station PC software and update the firmware. Measures 3m and works great for Tracer BN/A series MPPT charge controller. The connectors are well made to secure the connection.

Additional information

Weight	8.58 kg
Dimensions	11.93 × 7.2 × 2.52 cm
Charging Port Type	Serial (RJ45)
Product Dimensions	11.93 x 7.2 x 2.52 inches
Item Weight	8.58 pounds
ASIN	B07429RK43
Country of Origin	‎China
Item model number	Tracer4215BN-MT50
Warranty Description	We offer 2 years limited warranty
Batteries Required?	‎No
Manufacturer	Epsolar

Reviews (0)

Ratings

0.0

0 Product Ratings

Review this product

Share your thoughts with other customers

Write a review

Reviews

There are no reviews yet.

Your bag is empty

Your bag is empty

EPEVER MPPT Solar Charge Controller 40A 150V PV Solar Panel Controller Negative Ground W/ MT50 Remote Meter for LiFePO4 Battery [Tracer4215BN]

People Also Viewed

SolarEpic Tracer4215BN 40amp Solar Charge Controller Feature:

MPPT Solar Charge Controller 40A Tracer4215BN Schematic Diagram

SolarEpic 4215BN Solar Charge Controller 40A:

MT50 Remote Meter:

Battery Temperature Sensor and PC Communication Cable:

0.0

Review this product

Reviews

Similar Products

Your bag is empty