Your bag is empty
Don't miss out on great deals! Start shopping or Sign in to view products added.
Shop What's New Sign in-
- 407 Low-Density is a blended microballoon-based fairing filler for WEST SYSTEM Epoxy.
- Add 407 to a mixture of epoxy resin/hardener to create a fairing putty.
- Blended with epoxy to a “peanut butter” consistency, it will be easy to fair.
- Cures to a dark red/brown color.
- You can blend it into any WEST SYSTEM 105 Resin/20X Hardener combination, G/flex Epoxy 650, or G/5 Five-Minute Adhesive.
FILLER LOW DENSITY 12 OZ
-
- 410 Microlight is the ideal low-density filler.
- When blended with epoxy, it creates a light, easily-worked epoxy fairing compound.
- Especially suited for fairing large areas.
- After epoxy thickened with 410 cures, it is about 30% easier to sand than most other epoxy-based fairing compounds.
- Not recommended for use under dark paint, or other surfaces subject to high temperatures.
FILLER MICROLIGHT 5 OZ
-
- Premium Epoxy Kits Include Enough 5:1 Marine Epoxy Resin And Hardener To Complete A Variety Of Boat Building, Composite Construction, And Epoxy Repair Projects. For Use On Wood, Fiberglass, Reinforcement Fabrics, Etched Aluminum, Bare Steel, And Lead. Not Suitable For Clear-Coating Applications
- Ideal Viscosity For Wetting Out Fiberglass Cloth And Other Reinforcement Fabrics. Self-Leveling Properties Are Ideal For Coating And Laminating. Combine With Fillers To Make A High-Strength Fairing Compound, Filleting Material, Or Adhesive
- Choose Fast Or Slow Hardener: Pot Life Ranges From 12 Minutes @ 75°F For Fast Hardener, To 20 Minutes @ 75°F For Slow Hardener
- Choose From Three Epoxy Kit Sizes: Quart, Gallon, And 4.5 Gallon, With Your Choice Of Totalboat 5:1 Fast Or Slow Hardener. Kits Include Resin, Hardener, Calibrated Pumps, Mixing Sticks And Mixing Cups. Compatible With Other 5:1 Epoxy Resin Systems
TotalBoat 5:1 Epoxy Resin Kit (Gallon, Slow Hardener), Marine Grade Epoxy for Fiberglass and Wood Boat Building and Repair
-
- LIGHTWEIGHT, TWO PART POLYURETHANE FOAM: Ideal for adding buoyancy, thermal insulation, soundproofing, and filling gaps or voids; for nonstructural applications only; tested in accordance with U.S. Coast Guard Regulation # 33 CFR 183.114
- EASY TO USE: Liquid urethane pour foam has a simple 1:1 mix ratio, expands rapidly & hardens in place in about 5 min. at 70-80°F; to build multiple layers for filling under boat decks, pour expanding foam in separate batches
- 94% CLOSED CELL FOAM: Perfect for marine applications; resists water absorption and damage from gas, oil or solvents; once cured, foam can be coated with polyester, epoxy or vinyl ester resin; can also be easily cut or carved to shape
- IDEAL WORKING TEMPERATURE IS 75-85°F; proper temperature, timing, mixing and venting are critical for proper foam expansion; below 75°F expansion decreases; after mixing, the foam expands rapidly and becomes rigid, so clean the surface in advance and be ready to pour
- AVAILABLE IN A 2 QUART KIT AND A 2 GALLON KIT; Yield: 2 Quart Kit – 2 cubic ft; 2 Gallon Kit – 8 cubic ft; Flotation Range for 2lb foam: 75 lbs per mixed 2 quart kit, and 300 lbs per mixed 2 gallon kit; shelf life is 6 months from date of manufacture
TotalBoat Flotation Foam – 2 Part Expanding Polyurethane Marine Pour Foam for Boat Floatation, Insulation and Soundproofing (2 LB Density, 2 Gallon Kit)
-
- EPOXY KITS include low-viscosity resin and clear, non-blushing hardener for woodworking, boat building, laminating and repair projects. Ideal for clear coating. Simple mix ratio of 2 parts resin to 1 part hardener
- NON-BLUSHING EPOXY system means no time-consuming washdowns to remove surface blush between coats, so projects get finished faster. Low odor and low VOCs make it great for shop or indoor use. Cured surface is BPA-free, safer for potential food contact
- CHOOSE SLOW, MEDIUM, OR FAST HARDENER to control working properties and cure times. Slow Hardener has the longest working and cure times. Medium Hardener is ideal for most applications. Fast Hardener has the shortest working time and fastest cure
- CHOOSE EPOXY KIT SIZE: Pint, Quart, Gallon or 2 Gallon. All TotalBoat Epoxy Kits come with calibrated pumps. Compatible with epoxy thickeners, fillers and coloring agents
- PUMPS INCLUDED: Metered resin and hardener pumps provide the exact 2 parts resin to 1 part hardener ratio for a proper cure every time; easy-to-use pumps are calibrated so all you do is mix ONE full pump of hardener to every ONE full pump of resin
TotalBoat High Performance Epoxy Kit (Gallon, Fast), Crystal Clear Marine Grade Resin and Hardener for Woodworking, Fiberglass and Wood Boat Building and Repair
-
- GENERAL PURPOSE POLYESTER RESIN stays tacky to hold fiberglass cloth and composite fabrics in place during boat building & layups; ideal for hull & surfboard repair, bathtub & automotive fiberglass repairs
- FAST WET OUT OF FIBERGLASS and other reinforcement fabrics used to create composites and FRP parts for yachts, boats, motorcycles and more; ideal for spray-ups and hand layups on fiberglass, wood & metal
- EASY TO USE, NO SANDING: Polyester fiberglass resin is an excellent base coat for laminating applications; just mix in MEKP catalyst and use immediately; surface stays tacky so next layer adheres strongly
- INCLUDES MEKP CATALYST: Adjust the amount of MEKP hardener to control gel time; slow gel (20 min +): 1 teaspoon of MEKP per quart of resin; medium (15-20 min): 2 tsp/qt; fast (10 min): 3 tsp/qt
- CHOOSE QUART OR GALLON SIZE. Note: Resin and work area should be between 70°F to 95°F; store in temperatures below 77°F; for the final layer in your layup, use TotalBoat Polyester Finishing Resin
TotalBoat Polyester Laminating Resin – Marine Grade Fiberglass Resin and MEKP Catalyst for Layups and Repairs (Gallon)
-
- HIGH-STRENGTH, LIGHTWEIGHT TWO-PART EPOXY FILLER smooths out the rough spots and fills the voids; ideal for filling and fairing dents, holes and gouges on your boat, canoe or other watercraft. Marine-grade putty is also great for home, rv and auto repair
- SUPER SMOOTH FINISH FOR PERMANENT, WATERPROOF REPAIRS: Marine filler bonds strongly to damaged areas and cures without pinholes on wood, aluminum, steel and fiberglass repair areas; cured TotalFair is waterproof; use above and below the waterline
- EASY TO MIX AND APPLY: Foolproof 1 to 1 mix ratio - just mix the blue and yellow components until they turn green. Creamy smooth consistency makes it easy to spread and feather to a fine edge; won't sag on vertical and overhead surfaces
- CURES FAST. EASY TO SAND AND PAINT: Quick-drying compound is ready to sand in just 3 hours at 80°F; cured fairing compound sands easily; compatible with latex and epoxy primers and paints
- CHOOSE KIT SIZE: 2-PINT KIT, 2-QUART KIT or 1-GALLON KIT. NOTE: TotalBoat Gelcoat should not be applied directly over TotalFair or gelcoat will not cure properly. Before applying gelcoat, apply TotalBoat 2-Part Epoxy Primer or TotalProtect over TotalFair
TotalBoat-409336 TotalFair Marine Epoxy Fairing Compound for Fiberglass, Wood, Aluminum and Steel (2 Quart Kit)
-
- EPOXY KITS include low-viscosity resin and clear, non-blushing hardener for woodworking, boat building, laminating and repair projects. Ideal for clear coating. Simple mix ratio of 2 parts resin to 1 part hardener
- NON-BLUSHING EPOXY system means no time-consuming washdowns to remove surface blush between coats, so projects get finished faster. Low odor and low VOCs make it great for shop or indoor use. Cured surface is BPA-free, safer for potential food contact
- CHOOSE SLOW, MEDIUM, OR FAST HARDENER to control working properties and cure times. Slow Hardener has the longest working and cure times. Medium Hardener is ideal for most applications. Fast Hardener has the shortest working time and fastest cure
- CHOOSE EPOXY KIT SIZE: Pint, Quart, Gallon or 2 Gallon. All TotalBoat Epoxy Kits come with calibrated pumps. Compatible with epoxy thickeners, fillers and coloring agents
- PUMPS INCLUDED: Metered resin and hardener pumps provide the exact 2 parts resin to 1 part hardener ratio for a proper cure every time; easy-to-use pumps are calibrated so all you do is mix ONE full pump of hardener to every ONE full pump of resin
TotalBoat-510825 High Performance Epoxy Kit (Gallon, Medium), Crystal Clear Marine Grade Resin and Hardener for Woodworking, Fiberglass and Wood Boat Building and Repair
-
- CONVENIENT EPOXY BUNDLE contains one can of WEST SYSTEM 105-B Resin (126.6 fl oz), WEST SYSTEM 206-B Slow Hardener (27.5 fl oz), and one set of calibrated 300 Mini Pumps. 206 Slow Hardener is a low-viscosity epoxy curing agent for use when extended working time or a longer cure time is needed. It also provides adequate working time at higher shop temperatures.
- 105 EPOXY RESIN is a clear, pale yellow, low-viscosity liquid epoxy resin. Blended with 206 Slow Hardener at a 5:1 ratio, it cures to a hard, solid plastic with superior physical properties. It will wet out and bond with wood fiber, fiberglass, reinforcing fabrics and a variety of metals. (206 Slow Hardener is not intended for clear coating.)
- POT LIFE AT 72°F (22°C) is 20 to 25 minutes. Cures to a solid state in 10 to 15 hours. Cures to maximum strength in 1 to 4 days. Minimum recommended working temperature is 60°F (16°C). Does not contain VOCs and has relatively high flash point and no solvent odor, making it much friendlier to use than styrenated resins.
- EXCELLENT FOR COATNG OR BONDING, this epoxy is easily modified with WEST SYSTEM fillers, pigments, and additives to suit an enormous variety of construction and repair projects, including fiberglass boat repair, strip kayak and canoe construction. Resin viscosity is approximately 1000 centipoise at 72°F (22°C)
- INCLUDES CALIBRATED PUMPS that dispense 105 Resin & 206 Slow Hardener at the correct 5-part resin to 1-part hardener mix ratio. One pump stroke of resin for each one pump stroke of hardener yields 0.8 fl oz of the exact 5:1 epoxy mix ratio. These durable polypropylene pumps provide years of dependable service.
West System 105-B Epoxy Resin Bundle with 206-B Slow Epoxy Hardener and 300 Mini Pumps Epoxy Metering Pump Set, Pale Yellow
-
- CONVENIENT EPOXY BUNDLE contains one can of WEST SYSTEM 105-A Resin (32 fl oz), WEST SYSTEM 207-SB Extra Clear Hardener (10 fl oz), and one set of calibrated 300 Mini Pumps. 207 Extra Clear Hardener is a water-clear epoxy curing agent developed for coating and fiberglass cloth application where an exceptionally clear, moisture-resistant, natural wood finish is desired. Durable polypropylene pumps provide years of dependable service.
- 1105 EPOXY RESIN is a clear, low-viscosity liquid epoxy resin. Blended with 207 Extra Clear Hardener at a 3:1 ratio, it cures water clear to a hard, solid plastic with superior physical properties. Wets out without fisheyeing Excellent for clear coating yet has all the . It will wet out and bond with wood fiber, fiberglass, reinforcing fabrics and a variety of metals. Resin viscosity is approximately 1000 centipoise at 72°F (22°C)
- BLUSH-FREE 207 SPECIAL CLEAR HARDENER is an excellent choice for clear coating application. Blended with 105 Epoxy Resin, 207 Hardener will not blush or turn cloudy in humid conditions. Thin film applications roll out and tip off smoothly, requiring less sanding in preparation for finish coatings. Bundle includes calibrated pumps that dispense 105 Resin & 207 Extra Clear Hardener at the correct 3-part resin to 1-part hardener mix ratio with one pump stroke of each; yielding 0.9 fl oz.
- POT LIFE AT 72°F (22°C) is 20 to 26 minutes. Cures to a solid state in 10 to 15 hours. Cures to maximum strength in 4 to 7 days. Minimum recommended working temperature is 60°F (16°C). Does not contain VOCs and has relatively high flash point and no solvent odor, making it much friendlier to use than styrenated resins.
- EXCELLENT FOR COATNG OR BONDING, this epoxy is easily modified with WEST SYSTEM fillers, pigments, and additives to suit an enormous variety of construction and repair projects, including fiberglass boat repair, strip kayak and canoe construction.
- INCLUDES CALIBRATED PUMPS that dispense 105 Resin & 207 Slow Hardener at the correct 3-part resin to 1-part hardener mix ratio. One pump stroke of resin for each one pump stroke of hardener yields 0.8 fl oz of the exact 5:1 epoxy mix ratio. These durable polypropylene pumps provide years of dependable service.
WEST SYSTEM 105A Epoxy Resin (32 fl oz) Bundle with 207SA Special Clear Epoxy Hardener (10.6 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)
-
- CONVENIENT EPOXY BUNDLE contains one can of WEST SYSTEM 105-B Resin (126.6 fl oz), WEST SYSTEM 205-B Fast Hardener (27.5 fl oz), and one set of calibrated 300 Mini Pumps. 205 Fast Hardener is a medium-viscosity epoxy curing agent. It is useful in a majority of bonding situations, and at lower temperatures. 205 Fast Hardener produces a rapid epoxy cure that develops physical properties quickly at room temperature.
- 105 EPOXY RESIN is a clear, pale yellow, low-viscosity liquid epoxy resin. Blended with 205 Fast Hardener at a 5:1 ratio, it cures to a hard, solid plastic with superior physical properties. It will wet out and bond with wood fiber, fiberglass, reinforcing fabrics and a variety of metals. (205 Fast Hardener is not intended for clear coating.)
- POT LIFE AT 72°F (22°C) is 9 to 12 minutes. Cures to a solid state in 6 to 8 hours. Cures to maximum strength in 1 to 4 days. Minimum recommended working temperature is 40°F (4°C). Does not contain VOCs and has relatively high flash point and no solvent odor, making it much friendlier to use than styrenated resins.
- EXCELLENT FOR COATNG OR BONDING, this epoxy is easily modified with WEST SYSTEM fillers, pigments, and additives to suit an enormous variety of construction and repair projects, including fiberglass boat repair, strip kayak and canoe construction. Resin viscosity is approximately 1000 centipoise at 72°F (22°C)
- INCLUDES CALIBRATED PUMPS that dispense 105 Resin & 205 Fast Hardener at the correct 5-part resin to 1-part hardener mix ratio. One pump stroke of resin for each one pump stroke of hardener yields 0.8 fl oz of the exact 5:1 epoxy mix ratio. These durable polypropylene pumps provide years of dependable service.
WEST SYSTEM 105B Epoxy Resin (126.6 fl oz) Bundle with 205B Fast Epoxy Hardener (27.5 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)
-
- THIS BLEND OF FINE FIBERS thickens mixed epoxy resin and hardener to create a multi-purpose adhesive. Its most popular use is for bonding wood. Epoxy thickened with microfibers has good gap-filling qualities but will still do an excellent job of wetting-out/penetrating into wood fibers. Use it to thicken any WEST SYSTEM Epoxy including 105 Resin-based epoxies, G/flex or G/5. Blended with epoxy, it will cure to an off-white color.
- THICKEN EPOXY with this high-density filler to make a non-slumping adhesive that will bridge large gaps. It will strongly bond wood joints, saving you the time and labor involved in crafting tight joinery.
- FOR MAXIMUM STRENGTH add only enough filler to completely bridge gaps between surfaces without sagging or running out of the joint or gap. A small amount should squeeze out of the joints when clamped. For thick mixtures, don’t fill the mixing cup more than 1/3 full of epoxy before adding filler.
- THE AMOUNT OF FILLER you add controls epoxy's viscosity. There is no strict formula, just use your eye to judge what consistency will work best for the job at hand. The chart below offers guidelines to the differences between neat (unthickened) epoxy and three popular consistencies of thickened epoxy: "catsup," "mayonnaise," and "peanut butter."
- FOR CONSISTENCY across a project that calls for several batches of epoxy that's thickened to the same degree, you can create your own epoxy/filler "recipe." Carefully measure the amount of filler you add to the first epoxy batch until it reaches the viscosity you need, keeping track of the total amount you've added. Mix the same amounts of resin, hardener, and filler for the remaining batches so they all have the same viscosity.
WEST SYSTEM 403-28 Microfibers, 20 oz
-
- West System 405 Filleting Blend Adhesive Filler is a strong, wood-toned epoxy filler.
- Can be blended with other WEST SYSTEM Fillers to modify the shade of your epoxy mix.
- Can blend it into any WEST SYSTEM 105 Resin/Hardener combination, G/flex Epoxy 650, or G/5 Five-Minute Adhesive.
West System 405 Filleting Blend
-
- 406 Colloidal Silica is an epoxy thickening additive used to control the viscosity of the epoxy.
- Prevents epoxy runoff in vertical and overhead joints.
- Can be used to improve strength, abrasion resistance, and consistency of epoxy fairing compounds.
- Cures to an off-white color.
West System 406-2 Colloidal Silica 1.7 oz