Your bag is empty
Don't miss out on great deals! Start shopping or Sign in to view products added.
Shop What's New Sign in-
- 407 Low-Density is a blended microballoon-based fairing filler for WEST SYSTEM Epoxy.
- Add 407 to a mixture of epoxy resin/hardener to create a fairing putty.
- Blended with epoxy to a “peanut butter” consistency, it will be easy to fair.
- Cures to a dark red/brown color.
- You can blend it into any WEST SYSTEM 105 Resin/20X Hardener combination, G/flex Epoxy 650, or G/5 Five-Minute Adhesive.
FILLER LOW DENSITY 12 OZ
-
- 410 Microlight is the ideal low-density filler.
- When blended with epoxy, it creates a light, easily-worked epoxy fairing compound.
- Especially suited for fairing large areas.
- After epoxy thickened with 410 cures, it is about 30% easier to sand than most other epoxy-based fairing compounds.
- Not recommended for use under dark paint, or other surfaces subject to high temperatures.
FILLER MICROLIGHT 5 OZ
-
- G/flex Thickened Epoxy Adhesive is a toughened, versatile, 2-part epoxy for permanent waterproof bonding of plastic, fiberglass, ceramics, metals, damp and difficult-to-bond woods
- Makes structural bonds that can absorb the stress of expansion, contraction, shock, and vibration.
- Ideal for bonding dissimilar materials.
- Comes in a new 1oz syringe.
G/Flex 655-1 1 oz syringe
-
- CONVENIENT EPOXY BUNDLE contains one can of WEST SYSTEM 105-B Resin (126.6 fl oz), WEST SYSTEM 206-B Slow Hardener (27.5 fl oz), and one set of calibrated 300 Mini Pumps. 206 Slow Hardener is a low-viscosity epoxy curing agent for use when extended working time or a longer cure time is needed. It also provides adequate working time at higher shop temperatures.
- 105 EPOXY RESIN is a clear, pale yellow, low-viscosity liquid epoxy resin. Blended with 206 Slow Hardener at a 5:1 ratio, it cures to a hard, solid plastic with superior physical properties. It will wet out and bond with wood fiber, fiberglass, reinforcing fabrics and a variety of metals. (206 Slow Hardener is not intended for clear coating.)
- POT LIFE AT 72°F (22°C) is 20 to 25 minutes. Cures to a solid state in 10 to 15 hours. Cures to maximum strength in 1 to 4 days. Minimum recommended working temperature is 60°F (16°C). Does not contain VOCs and has relatively high flash point and no solvent odor, making it much friendlier to use than styrenated resins.
- EXCELLENT FOR COATNG OR BONDING, this epoxy is easily modified with WEST SYSTEM fillers, pigments, and additives to suit an enormous variety of construction and repair projects, including fiberglass boat repair, strip kayak and canoe construction. Resin viscosity is approximately 1000 centipoise at 72°F (22°C)
- INCLUDES CALIBRATED PUMPS that dispense 105 Resin & 206 Slow Hardener at the correct 5-part resin to 1-part hardener mix ratio. One pump stroke of resin for each one pump stroke of hardener yields 0.8 fl oz of the exact 5:1 epoxy mix ratio. These durable polypropylene pumps provide years of dependable service.
West System 105-B Epoxy Resin Bundle with 206-B Slow Epoxy Hardener and 300 Mini Pumps Epoxy Metering Pump Set, Pale Yellow
-
- CONVENIENT EPOXY BUNDLE contains one can of WEST SYSTEM 105-A Resin (32 fl oz), WEST SYSTEM 207-SB Extra Clear Hardener (10 fl oz), and one set of calibrated 300 Mini Pumps. 207 Extra Clear Hardener is a water-clear epoxy curing agent developed for coating and fiberglass cloth application where an exceptionally clear, moisture-resistant, natural wood finish is desired. Durable polypropylene pumps provide years of dependable service.
- 1105 EPOXY RESIN is a clear, low-viscosity liquid epoxy resin. Blended with 207 Extra Clear Hardener at a 3:1 ratio, it cures water clear to a hard, solid plastic with superior physical properties. Wets out without fisheyeing Excellent for clear coating yet has all the . It will wet out and bond with wood fiber, fiberglass, reinforcing fabrics and a variety of metals. Resin viscosity is approximately 1000 centipoise at 72°F (22°C)
- BLUSH-FREE 207 SPECIAL CLEAR HARDENER is an excellent choice for clear coating application. Blended with 105 Epoxy Resin, 207 Hardener will not blush or turn cloudy in humid conditions. Thin film applications roll out and tip off smoothly, requiring less sanding in preparation for finish coatings. Bundle includes calibrated pumps that dispense 105 Resin & 207 Extra Clear Hardener at the correct 3-part resin to 1-part hardener mix ratio with one pump stroke of each; yielding 0.9 fl oz.
- POT LIFE AT 72°F (22°C) is 20 to 26 minutes. Cures to a solid state in 10 to 15 hours. Cures to maximum strength in 4 to 7 days. Minimum recommended working temperature is 60°F (16°C). Does not contain VOCs and has relatively high flash point and no solvent odor, making it much friendlier to use than styrenated resins.
- EXCELLENT FOR COATNG OR BONDING, this epoxy is easily modified with WEST SYSTEM fillers, pigments, and additives to suit an enormous variety of construction and repair projects, including fiberglass boat repair, strip kayak and canoe construction.
- INCLUDES CALIBRATED PUMPS that dispense 105 Resin & 207 Slow Hardener at the correct 3-part resin to 1-part hardener mix ratio. One pump stroke of resin for each one pump stroke of hardener yields 0.8 fl oz of the exact 5:1 epoxy mix ratio. These durable polypropylene pumps provide years of dependable service.
WEST SYSTEM 105A Epoxy Resin (32 fl oz) Bundle with 207SA Special Clear Epoxy Hardener (10.6 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)
-
- CONVENIENT EPOXY BUNDLE contains one can of WEST SYSTEM 105-B Resin (126.6 fl oz), WEST SYSTEM 205-B Fast Hardener (27.5 fl oz), and one set of calibrated 300 Mini Pumps. 205 Fast Hardener is a medium-viscosity epoxy curing agent. It is useful in a majority of bonding situations, and at lower temperatures. 205 Fast Hardener produces a rapid epoxy cure that develops physical properties quickly at room temperature.
- 105 EPOXY RESIN is a clear, pale yellow, low-viscosity liquid epoxy resin. Blended with 205 Fast Hardener at a 5:1 ratio, it cures to a hard, solid plastic with superior physical properties. It will wet out and bond with wood fiber, fiberglass, reinforcing fabrics and a variety of metals. (205 Fast Hardener is not intended for clear coating.)
- POT LIFE AT 72°F (22°C) is 9 to 12 minutes. Cures to a solid state in 6 to 8 hours. Cures to maximum strength in 1 to 4 days. Minimum recommended working temperature is 40°F (4°C). Does not contain VOCs and has relatively high flash point and no solvent odor, making it much friendlier to use than styrenated resins.
- EXCELLENT FOR COATNG OR BONDING, this epoxy is easily modified with WEST SYSTEM fillers, pigments, and additives to suit an enormous variety of construction and repair projects, including fiberglass boat repair, strip kayak and canoe construction. Resin viscosity is approximately 1000 centipoise at 72°F (22°C)
- INCLUDES CALIBRATED PUMPS that dispense 105 Resin & 205 Fast Hardener at the correct 5-part resin to 1-part hardener mix ratio. One pump stroke of resin for each one pump stroke of hardener yields 0.8 fl oz of the exact 5:1 epoxy mix ratio. These durable polypropylene pumps provide years of dependable service.
WEST SYSTEM 105B Epoxy Resin (126.6 fl oz) Bundle with 205B Fast Epoxy Hardener (27.5 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)
-
- THIS BLEND OF FINE FIBERS thickens mixed epoxy resin and hardener to create a multi-purpose adhesive. Its most popular use is for bonding wood. Epoxy thickened with microfibers has good gap-filling qualities but will still do an excellent job of wetting-out/penetrating into wood fibers. Use it to thicken any WEST SYSTEM Epoxy including 105 Resin-based epoxies, G/flex or G/5. Blended with epoxy, it will cure to an off-white color.
- THICKEN EPOXY with this high-density filler to make a non-slumping adhesive that will bridge large gaps. It will strongly bond wood joints, saving you the time and labor involved in crafting tight joinery.
- FOR MAXIMUM STRENGTH add only enough filler to completely bridge gaps between surfaces without sagging or running out of the joint or gap. A small amount should squeeze out of the joints when clamped. For thick mixtures, don’t fill the mixing cup more than 1/3 full of epoxy before adding filler.
- THE AMOUNT OF FILLER you add controls epoxy's viscosity. There is no strict formula, just use your eye to judge what consistency will work best for the job at hand. The chart below offers guidelines to the differences between neat (unthickened) epoxy and three popular consistencies of thickened epoxy: "catsup," "mayonnaise," and "peanut butter."
- FOR CONSISTENCY across a project that calls for several batches of epoxy that's thickened to the same degree, you can create your own epoxy/filler "recipe." Carefully measure the amount of filler you add to the first epoxy batch until it reaches the viscosity you need, keeping track of the total amount you've added. Mix the same amounts of resin, hardener, and filler for the remaining batches so they all have the same viscosity.
WEST SYSTEM 403-28 Microfibers, 20 oz
-
- West System 405 Filleting Blend Adhesive Filler is a strong, wood-toned epoxy filler.
- Can be blended with other WEST SYSTEM Fillers to modify the shade of your epoxy mix.
- Can blend it into any WEST SYSTEM 105 Resin/Hardener combination, G/flex Epoxy 650, or G/5 Five-Minute Adhesive.
West System 405 Filleting Blend
-
- 406 Colloidal Silica is an epoxy thickening additive used to control the viscosity of the epoxy.
- Prevents epoxy runoff in vertical and overhead joints.
- Can be used to improve strength, abrasion resistance, and consistency of epoxy fairing compounds.
- Cures to an off-white color.
West System 406-2 Colloidal Silica 1.7 oz
-
- EXCELLENT ADHESION adhesion to hard-to bond woods. This toughened, versatile, thickened epoxy is for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. A bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock, and vibration.
- IDEAL FOR BONDING dissimilar materials. Mixed at a 1:1 ratio, this 2-part epoxy gives you 46 minutes of pot life at 72°F and an open (working) time of 60-75 minutes. It reaches an initial cure in 3 to 4 hrs, workable cure in 7-10 hours, and full cure in 24 hours.
- OFFERS GREATER FLEXIBILITY than traditional epoxies or polyester resins. Yet it is much stiffer than adhesive sealants. With a modulus of elasticity of 150,000 PSI, this epoxy bonds tenaciously to a metals, plastics, glass, masonry, and fiberglass.
- BONDS MANY MATERIALS including dissimilar ones. G/flex has a superior grip so that it can be used to bond to metals, plastics, glass, masonry, and fiberglass. G/flex is ideal for repairs to aluminum boats and polyethylene and ABS canoes and kayaks. It can also be used to wet out and bond fiberglass tapes and fabrics.
- MAKES STRUCTURAL BONDS that can absorb the stress of expansion, contraction, shock, and vibration. G/flex can be used on damp or wet surfaces, and even underwater when applied with specific techniques. Perfect for repairs to plastic boats, canoes or kayaks made of polyethylene or ABS.
West System 655-8 G/flex Epoxy Adhesive, two 4.5 fl oz., White
-
- G/flex 650 is a toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods.
- G/flex adheres tenaciously to difficult- to-glue hardwoods, both tropical and domestic varieties. This is important since many of the exotic and tropical species now being used to replace traditional woods present bonding challenges.
- G/flex has the ability to glue damp woods. It can be used on wet surfaces, even underwater when applied with specific techniques.
- Country of origin: United States
WEST SYSTEM G/flex Epoxy (2- 4oz)
-
- Six10 Thickened Epoxy Adhesive combines the strength, reliability, and excellent physical properties of a two-part WEST SYSTEM Epoxy with point-and-shoot convenience.
- The self-metering coaxial cartridge dispenses a gap-filling structural epoxy that bonds tenaciously to wood, metals, fiberglass, and concrete.
- The tube comes with a static mixer that lets you lay down a bead of thickened epoxy with any standard caulking gun.
- Six10 Thickened Epoxy Adhesive is designed to bond to: Wood, Fiber, Metals, Composites, & Masonry
West Systems 610 Resin/Hardener Epoxy Adhesive, 190mL Cartridge, Straw